商品說明
The Right Amount of Power
GX amplifiers deliver just the right amount of power to the most popular speakers used by entertainers. Typically, loudspeaker manufacturers recommend an amplifier with power output equal to the speaker’s Program (Music) Power rating or two times (2 x) the Continuous (RMS) Power rating.
Optimum Cooling, Toroidal Power Transformers, Hightest Power-To-Weight Ratios In the Industry…
Stable Performance, Long Life
As always, GX Series amplifiers are fully protected from the usual hazards of the trade, ensuring stable performance and long life.
Full Peak Power While Preventing Detrimental Overloads
GuardRail protection delivers full peak power while preventing detrimental overloads. During excessive clipping, or extreme overheating, GuardRail reduces gain just enough to preserve the integrity of the music, protect the speakers and keep the audience excited, without unprofessional distortion levels or shutdowns.
Subwoofer / Satellite Crossover
A subwoofer reduces strain on the full-range speaker, allowing it to play louder, or letting a smaller speaker do the same job. The GX Series supports this mode with a Crossover switch that splits the full-range input entering Ch 1, sending 20 Hz -100 Hz to the sub (Ch 1) and 100 Hz – 20 kHz to the top box (Ch 2). The front panel gain controls balance the sub and top box, while GuardRail optimizes peak power into the sub and top individually, for greater musical impact and dynamic range. GuardRail optimizes peak power into the sub and top individually, for greater musical impact and dynamic range.
The GX3 is ideal for speakers in the 300 W range, while the GX5 provides full performance for 500 W speakers and the GX7 outputs 725 W into an 8 ohm load. Owners of popular 4 ohm loudspeakers (such as dual-woofer, two-way models) will find the 700 W (4 ohm) power of the GX5 an ideal match while the GX7’s 1000 W will very capably power many of today’s popular subwoofers or two typical 8 ohm speakers per channel.
The GX3 is ideal for speakers in the 300 W range, while the GX5 provides full performance for 500 W speakers and the GX7 outputs 725 W into an 8 ohm load. Owners of popular 4 ohm loudspeakers (such as dual-woofer, two-way models) will find the 700 W (4 ohm) power of the GX5 an ideal match while the GX7’s 1000 W will very capably power many of today’s popular subwoofers or two typical 8 ohm speakers per channel
Model | GX3 | GX5 | GX7 |
Power | 300 W per channel into 8 ohms |
500 W per channel into 8 ohms |
725 W per channel into 8 ohms |
Dimensions (H×W×D) | 89 × 483 × 257 mm 3.5 × 19 × 10.1 in |
89 × 483 × 257 mm 3.5 × 19 × 10.1 in |
89 × 483 × 257 mm 3.5 × 19 × 10.1 in |